The PTOG2 has front panel access to inputs, channel select and mute toggles.

This is a 2 channel input, 4 channel output console switch.

The 2 channel switch has 8 toggles. Four independent mute toggles per channel and four channel select toggles.

All toggles have protective collars.

All inputs have easy release locking tabs.

OPERATION:

Be sure all 4 mute toggles are on, in the up position.

Set all channel select toggles to Left 1, Right 1, Sub 1 and Fill 1.

Connect the snake cable, male XLR outputs into the audio system.

Plug in the first bands console into Left 1, Right 1, Sub 1 and Fill 1, (channel 1).

Plug the second bands console into Left 2, Right 2, Sub 2, and Fill 2, (channel 2).

When the audio system and band consoles have power, turn the mute toggles off, mute toggles will be in the down position.

The opening bands console is now connected to the audio system.

When switching from console to console it is best to fade out program music on console 1. Then mute all outputs Left, Right, Sub, and Fill, then switch to the second console. Once switched turn all mute toggles off and fade in console 2 program music.

Always be sure to have the mute toggles on when switching from console 1 to console 2.

If there is a third band to play, simply remove the deselected inputs form the finished band and connect the third bands console to the inputs you removed on the PTOG2.

NO NEED TO MUTE AS THE CHANNELS THAT ARE NOT SELECTED ARE DISCONNECTED!

Both the PTOG2 and PTOG4 have 6' snakes with 6" fan outs. The fan outs have four male XLR outputs and are labeled.

L (Left), R (Right), S (Sub) and F (Fill).

No more reaching into the back of the rack to make connections.

The PTOG4 has front panel access to inputs, channel select and mute toggles.

This is a 4 channel input, 4 channel output console switch.

There are four independent mute toggles per channel with protective collars.

Four rotary select toggles for each channel with cream chicken head knobs.

All inputs have easy release locking tabs.

OPERATION: (Same basic procedure as the 2 channel.)

Be sure all 4 mute toggles turned on, in the up position.

Connect the snake cable, male XLR outputs into the audio system.

Connect the first bands console outputs to the corresponding PTOG4 inputs.

L1, R1, S1, and F1, channel 1.

Second bands outputs into inputs L2, R2, S2, and F2.

Repeat up to the fourth bands console.

Select L1, R1, S1, and F1 using the rotary toggle secect switch.

When the audio system and consoles have power, turn the mute toggles off. The mute toggles will be in the down position.

The opening bands console is now connected to the audio system.

When switching from console to console it is best to fade out program music on console 1. Then mute all outputs Left, Right, Sub, and Fill, then switch the second console.

Once switched turn all mute toggles off and fade in console 2 program music.

Always be sure to have the mute toggles on when switching from console 1 to any of the other console positions.

Also like the PTOG2 if you have more than four bands, simply remove the finished bands console and connect the new bands into the PTOG inputs.

NO NEED TO MUTE AS THE CHANNELS THAT ARE NOT SELECTED ARE DISCONNECTED!